Dieses Thema wird derzeit nicht bearbeitet.
Die Arbeiten auf diesem Gebiet stehen im Zusammenhang mit der Erzeugung von Nanostrukturen für Anwendungen in der Photovoltaik sowie Halbleitersimulation.Ausführlichere Darstellungen der WIAS-Forschungsthemen finden sich auf der jeweils zugehörigen englischen Seite.
Publikationen
Monografien
-
M. Hintermüller, D. Wegner, Distributed and Boundary Control Problems for the Semidiscrete Cahn--Hilliard/Navier--Stokes System with Nonsmooth Ginzburg--Landau Energies, in: Topological Optimization and Optimal Transport in the Applied Sciences, M. Bergounioux, E. Oudet, M. Rumpf, G. Carlier, Th. Champion, F. Santambrogio, eds., 17 of Radon Series on Computational and Applied Mathematics, De Gruyter, Berlin, 2017, pp. 40--63, (Chapter Published).
-
H.-Chr. Kaiser, D. Knees, A. Mielke, J. Rehberg, E. Rocca, M. Thomas, E. Valdinoci, eds., PDE 2015: Theory and Applications of Partial Differential Equations, 10 of Discrete and Continuous Dynamical Systems -- Series S, American Institute of Mathematical Science, Springfield, 2017, iv+933 pages, (Collection Published).
-
B. Wagner, B. Rech, A. Münch, V. Mehrmann, eds., Proceedings of the Workshop Mathematics in Industry: Technologies of Thin Film Solar Cells, WIAS, Berlin, 2010, 68 pages, (Collection Published).
Artikel in Referierten Journalen
-
S. Kayser, P. Farrell, N. Rotundo, Detecting striations via the lateral photovoltage scanning method without screening effect, Optical and Quantum Electronics, 53 (2021), pp. 288/1--288/10, DOI 10.1007/s11082-021-02911-1 .
Abstract
The lateral photovoltage scanning method (LPS) detects doping inhomogeneities in semiconductors such as Si, Ge and Si(x)Ge(1-x) in a cheap, fast and nondestructive manner. LPS relies on the bulk photovoltaic effect and thus can detect any physical quantity affecting the band profiles of the sample. LPS finite volume simulation using commercial software suffer from long simulation times and convergence instabilities. We present here an open-source finite volume simulation for a 2D Si sample using the ddfermi simulator. For low injection conditions we show that the LPS voltage is proportional to the doping gradient as previous theory suggested under certain conditions. For higher injection conditions we directly show how the LPS voltage and the doping gradient differ and link the physical effect of lower local resolution to the screening effect. Previously, the loss of local resolution was assumed to be only connected to the enlargement of the excess charge carrier distribution. -
P. Farrell, S. Kayser, N. Rotundo, Modeling and simulation of the lateral photovoltage scanning method, Computers & Mathematics with Applications. An International Journal, 102 (2021), pp. 248--260, DOI 10.1016/j.camwa.2021.10.017 .
Abstract
The fast, cheap and nondestructive lateral photovoltage scanning (LPS) method detects inhomogeneities in semiconductors crystals. The goal of this paper is to model and simulate this technique for a given doping profile. Our model is based on the semiconductor device equations combined with a nonlinear boundary condition, modelling a volt meter. To validate our 2D and 3D finite volume simulations, we use theory developed by Tauc [21] to derive three analytical predictions which our simulation results corroborate, even for anisotropic 2D and 3D meshes. Our code runs about two orders of magnitudes faster than earlier implementations based on commercial software [15]. It also performs well for small doping concentrations which previously could not be simulated at all due to numerical instabilities. Our simulations provide experimentalists with reference laser powers for which meaningful voltages can still be measured. For higher laser power the screening effect does not allow this anymore. -
D. Uebel, S. Kayser, T. Markurt, O.C. Ernst, Th. Teubner, T. Boeck, Fast Raman mapping and in situ TEM observation of metal induced crystallization of amorphous silicon, CrystEngComm, 22 (2020), pp. 7983--7991, DOI 10.1039/D0CE00960A .
Abstract
Crystalline silicon is grown onto an amorphous silicon (a-Si) seed layer from liquid tin solution (steady state liquid phase epitaxy, SSLPE). To investigate the crystallization of embedded a-Si during our process, we adapted Raman measurements for fast mapping, with dwell times of just one second per single measurement. A purposely developed imaging algorithm which performs point-by-point gauss fitting provides adequate visualization of the data. We produced scans of a-Si layers showing crystalline structures formed in the a-Si matrix during processing. Compared to scanning electron microscopy images which reveal merely the topography of the grown layer, new insights are gained into the role of the seed layer by Raman mapping. As part of a series of SSLPE experiments, which were interrupted at various stages of growth, we show that plate-like crystallites grow laterally over the a-Si layer while smaller, randomly orientated crystals arise from the a-Si layer. Results are confirmed by an in situ TEM experiment of the metal-induced crystallization. Contrary to presumptions, initially formed surface crystallites do not originate from the seed layer and are irrelevant to the final growth morphology, since they dissolve within minutes due to Ostwald ripening. The a-Si layer crystallizes within minutes as well, and crystallites of the final morphology originate from seeds of this layer. -
T. Ahnert, A. Münch, B. Wagner, Models for the two-phase flow of concentrated suspensions, European Journal of Applied Mathematics, 30 (2019), pp. 585--617 (published online on 04.06.2018), DOI 10.1017/S095679251800030X .
Abstract
A new two-phase model is derived that make use of a constitutive law combining non-Brownian suspension with granular rheology, that was recently proposed by Boyer et al. [PRL, 107(18),188301 (2011)]. It is shown that for the simple channel flow geometry, the stress model naturally exhibits a Bingham type flow property with an unyielded finite-size zone in the center of the channel. As the volume fraction of the solid phase is increased, the various transitions in the flow fields are discussed using phase space methods for a boundary value problem, that is derived from the full model. The predictions of this analysis is then compared to the direct finite-element numerical solutions of the full model. -
S. Bergmann, D.A. Barragan-Yani, E. Flegel, K. Albe, B. Wagner, Anisotropic solid-liquid interface kinetics in silicon: An atomistically informed phase-field model, Modelling and Simulation in Materials Science and Engineering, 25 (2017), pp. 065015/1--065015/20, DOI 10.1088/1361-651X/aa7862 .
Abstract
We present an atomistically informed parametrization of a phase-field model for describing the anisotropic mobility of liquid-solid interfaces in silicon. The model is derived from a consistent set of atomistic data and thus allows to directly link molecular dynamics and phase field simulations. Expressions for the free energy density, the interfacial energy and the temperature and orientation dependent interface mobility are systematically fitted to data from molecular dynamics simulations based on the Stillinger-Weber interatomic potential. The temperature-dependent interface velocity follows a Vogel-Fulcher type behavior and allows to properly account for the dynamics in the undercooled melt. -
M. Dziwnik, A. Münch, B. Wagner, An anisotropic phase-field model for solid-state dewetting and its sharp-interface limit, Nonlinearity, 30 (2017), pp. 1465--1496.
Abstract
We propose a phase field model for solid state dewetting in form of a Cahn-Hilliard equation with weakly anisotropic surface energy and a degenerate mobility together with a free boundary condition at the film-substrate contact line. We derive the corresponding sharp interface limit via matched asymptotic analysis involving multiple inner layers. The resulting sharp interface model is consistent with the pure surface diffusion model. In addition, we show that the natural boundary conditions, as indicated from the first variation of the total free energy, imply a contact angle condition for the dewetting front, which, in the isotropic case, is consistent with the well-known Young's equation. -
A. Bercegol, B. Chacko, R. Klenk, I. Lauermann, M.Ch. Lux-Steiner, M. Liero, Point contacts at the copper-indium-gallium-selenide interface -- A theoretical outlook, Journal of Applied Physics, 119 (2016), pp. 155304/1--155304/7, DOI 10.1063/1.4947267 .
Abstract
For a long time, it has been assumed that recombination in the space-charge region of CIGS is dominant, at least in high efficiency solar cells with low band gap. The recent developments like KF post deposition treatment and point-contact junction may call this into question. In this work a theoretical outlook is made using three-dimensional simulations to investigate the effect of pointcontact openings through a passivation layer on CIGS solar cell performance. A large set of solar cells is modeled under different scenarios for the charged defect levels and density, radius of the openings, interface quality and conduction band offset. The positive surface charge created by the passivation layer induces band bending and this influences the contact (CdS) properties, making it beneficial for the open circuit voltage and efficiency, and the effect is even more pronounced when coverage area is more than 95 %, and also makes a positive impact on the device performance, even in the presence of a spike at CIGS/CdS heterojunction. -
M.G. Hennessy, V.M. Burlakov, A. Münch, B. Wagner, A. Goriely, Controlled topological transitions in thin-film phase separation, SIAM Journal on Applied Mathematics, 75 (2015), pp. 38--60.
Abstract
In this paper the evolution of a binary mixture in a thin-film geometry with a wall at the top and bottom is considered. Bringing the mixture into its miscibility gap so that no spinodal decomposition occurs in the bulk, a slight energetic bias of the walls towards each one of the constituents ensures the nucleation of thin boundary layers that grow until the constituents have moved into one of the two layers. These layers are separated by an interfacial region, where the composition changes rapidly. Conditions that ensure the separation into two layers with a thin interfacial region are investigated based on a phase-field model and using matched asymptotic expansions a corresponding sharp-interface problem for the location of the interface is established. It is then argued that a thus created two-layer system is not at its energetic minimum but destabilizes into a controlled self-replicating pattern of trapezoidal vertical stripes by minimizing the interfacial energy between the phases while conserving their area. A quantitative analysis of this mechanism is carried out via a new thin-film model for the free interfaces, which is derived asymptotically from the sharp-interface model. -
A. Glitzky, A. Mielke, A gradient structure for systems coupling reaction-diffusion effects in bulk and interfaces, ZAMP Zeitschrift fur Angewandte Mathematik und Physik. ZAMP. Journal of Applied Mathematics and Physics. Journal de Mathematiques et de Physique Appliquees, 64 (2013), pp. 29--52.
Abstract
We derive gradient-flow formulations for systems describing drift-diffusion processes of a finite number of species which undergo mass-action type reversible reactions. Our investigations cover heterostructures, where material parameter may depend in a nonsmooth way on the space variable. The main results concern a gradient flow formulation for electro-reaction-diffusion systems with active interfaces permitting drift-diffusion processes and reactions of species living on the interface and transfer mechanisms allowing bulk species to jump into an interface or to pass through interfaces. The gradient flows are formulated in terms of two functionals: the free energy and the dissipation potential. Both functionals consist of a bulk and an interface integral. The interface integrals determine the interface dynamics as well as the self-consistent coupling to the model in the bulk. The advantage of the gradient structure is that it automatically generates thermodynamically consistent models. -
A. Mielke, Thermomechanical modeling of energy-reaction-diffusion systems, including bulk-interface interactions, Discrete and Continuous Dynamical Systems -- Series S, 6 (2013), pp. 479--499.
Abstract
We show that many couplings between parabolic systems for processes in solids can be formulated as a gradient system with respect to the total free energy or the total entropy. This includes Allen-Cahn, Cahn-Hilliard, and reaction-diffusion systems and the heat equation. For this, we write the coupled system as an Onsager system (X,Φ,K) defining the evolution $dot U$= - K(U) DΦ(U). Here Φ is the driving functional, while the Onsager operator K(U) is symmetric and positive semidefinite. If the inverse G=K-1 exists, the triple (X,Φ,G) defines a gradient system. Onsager systems are well suited to model bulk-interface interactions by using the dual dissipation potential Ψ*(U, Ξ)= ½ 〈Ξ K(U) Ξ〉. Then, the two functionals Φ and Ψ* can be written as a sum of a volume integral and a surface integral, respectively. The latter may contain interactions of the driving forces in the interface as well as the traces of the driving forces from the bulk. Thus, capture and escape mechanisms like thermionic emission appear naturally in Onsager systems, namely simply through integration by parts. -
A. Glitzky, An electronic model for solar cells including active interfaces and energy resolved defect densities, SIAM Journal on Mathematical Analysis, 44 (2012), pp. 3874--3900.
Abstract
We introduce an electronic model for solar cells taking into account heterostructures with active interfaces and energy resolved volume and interface trap densities. The model consists of continuity equations for electrons and holes with thermionic emission transfer conditions at the interface and of ODEs for the trap densities with energy level and spatial position as parameters, where the right hand sides contain generation-recombination as well as ionization reactions. This system is coupled with a Poisson equation for the electrostatic potential. We show the thermodynamic correctness of the model and prove a priori estimates for the solutions to the evolution system. Moreover, existence and uniqueness of weak solutions of the problem are proven. For this purpose we solve a regularized problem and verify bounds of the corresponding solution not depending on the regularization level. -
A. Glitzky, Analysis of electronic models for solar cells including energy resolved defect densities, Mathematical Methods in the Applied Sciences, 34 (2011), pp. 1980--1998.
Abstract
We introduce an electronic model for solar cells including energy resolved defect densities. The resulting drift-diffusion model corresponds to a generalized van Roosbroeck system with additional source terms coupled with ODEs containing space and energy as parameters for all defect densities. The system has to be considered in heterostructures and with mixed boundary conditions from device simulation. We give a weak formulation of the problem. If the boundary data and the sources are compatible with thermodynamic equilibrium the free energy along solutions decays monotonously. In other cases it may be increasing, but we estimate its growth. We establish boundedness and uniqueness results and prove the existence of a weak solution. This is done by considering a regularized problem, showing its solvability and the boundedness of its solutions independent of the regularization level. -
A. Mielke, A gradient structure for reaction-diffusion systems and for energy-drift-diffusion systems, Nonlinearity, 24 (2011), pp. 1329--1346.
Abstract
In recent years the theory of Wasserstein distances has opened up a new treatment of the diffusion equations as gradient systems, where the entropy takes the role of the driving functional and where the space is equipped with the Wasserstein metric. We show that this structure can be generalized to closed reaction-diffusion systems, where the free energy (or the entropy) is the driving functional and further conserved quantities may exists, like the total number of chemical species. The metric is constructed by using the dual dissipation potential, which is a convex function of the chemical potentials. In particular, it is possible to treat diffusion and reaction terms simultaneously. The same ideas extend to semiconductor equations involving the electron and hole densities, the electrostatic potential, and the temperature. -
N. Allsop, R. Nürnberg, M.Ch. Lux-Steiner, Th. Schedel-Niedrig, Three-dimensional simulations of a thin film heterojunction solar cell with a point contact/defect passivation structure at the heterointerface, Applied Physics Letters, 95 (2009), pp. 122108/1--122108/3.
-
H.-Chr. Kaiser, H. Neidhardt, J. Rehberg, Classical solutions of drift-diffusion equations for semiconductor devices: The 2D case, Nonlinear Analysis. Theory, Methods & Applications. An International Multidisciplinary Journal. Series A: Theory and Methods, 71 (2009), pp. 1584--1605.
Abstract
We regard drift-diffusion equations for semiconductor devices in Lebesgue spaces. To that end we reformulate the (generalized) van Roosbroeck system as an evolution equation for the potentials to the driving forces of the currents of electrons and holes. This evolution equation falls into a class of quasi-linear parabolic systems which allow unique, local in time solution in certain Lebesgue spaces. In particular, it turns out that the divergence of the electron and hole current is an integrable function. Hence, Gauss' theorem applies, and gives the foundation for space discretization of the equations by means of finite volume schemes. Moreover, the strong differentiability of the electron and hole density in time is constitutive for the implicit time discretization scheme. Finite volume discretization of space, and implicit time discretization are accepted custom in engineering and scientific computing. ---This investigation puts special emphasis on non-smooth spatial domains, mixed boundary conditions, and heterogeneous material compositions, as required in electronic device simulation. -
J.A. Griepentrog, W. Höppner, H.-Chr. Kaiser, J. Rehberg, A bi-Lipschitz continuous, volume preserving map from the unit ball onto a cube, Note di Matematica, 28 (2008), pp. 185--201.
Abstract
We construct two bi-Lipschitz, volume preserving maps from Euclidean space onto itself which map the unit ball onto a cylinder and onto a cube, respectively. Moreover, we characterize invariant sets of these mappings. -
R. Haller-Dintelmann, H.-Chr. Kaiser, J. Rehberg, Elliptic model problems including mixed boundary conditions and material heterogeneities, Journal de Mathématiques Pures et Appliquées, 89 (2008), pp. 25--48.
-
J. Elschner, H.-Chr. Kaiser, J. Rehberg, G. Schmidt, $W^1,q$ regularity results for elliptic transmission problems on heterogeneous polyhedra, Mathematical Models & Methods in Applied Sciences, 17 (2007), pp. 593--615.
-
H.-Chr. Kaiser, H. Neidhardt, J. Rehberg, Classical solutions of quasilinear parabolic systems on two dimensional domains, NoDEA. Nonlinear Differential Equations and Applications, 13 (2006), pp. 287-310.
Beiträge zu Sammelwerken
-
V. Mehrmann, A. Mielke, F. Schmidt, D -- Electronic and photonic devices, in: MATHEON -- Mathematics for Key Technologies, M. Grötschel, D. Hömberg, J. Sprekels, V. Mehrmann ET AL., eds., 1 of EMS Series in Industrial and Applied Mathematics, European Mathematical Society Publishing House, Zurich, 2014, pp. 229--232.
-
A. Glitzky, A. Mielke, L. Recke, M. Wolfrum, S. Yanchuk, D2 -- Mathematics for optoelectronic devices, in: MATHEON -- Mathematics for Key Technologies, M. Grötschel, D. Hömberg, J. Sprekels, V. Mehrmann ET AL., eds., 1 of EMS Series in Industrial and Applied Mathematics, European Mathematical Society Publishing House, Zurich, 2014, pp. 243--256.
-
H. Gajewski, H.-Chr. Kaiser, H. Langmach, R. Nürnberg, R.H. Richter, Mathematical modelling and numerical simulation of semiconductor detectors, in: Mathematics --- Key Technology for the Future. Joint Projects Between Universities and Industry, W. Jäger, H.-J. Krebs, eds., Springer, Berlin [u.a.], 2003, pp. 355--364.
-
U. Bandelow, H. Gajewski, H.-Chr. Kaiser, Modeling combined effects of carrier injection, photon dynamics and heating in Strained Multi-Quantum-Well Laser, in: Physics and Simulation of Optoelectronic Devices VIII, R.H. Binder, P. Blood, M. Osinski, eds., 3944 of Proceedings of SPIE, SPIE, Bellingham, WA, 2000, pp. 301--310.
-
H.-Chr. Kaiser, J. Rehberg, About some mathematical questions concerning the embedding of Schrödinger-Poisson systems into the drift-diffusion model of semiconductor devices, in: EQUADIFF 99: International Conference on Differential Equations, Berlin 1999, B. Fiedler, K. Gröger, J. Sprekels, eds., 2, World Scientific, Singapore [u. a.], 2000, pp. 1328--1333.
Vorträge, Poster
-
M. Hintermüller, Optimal control of multiphase fluids and droplets (online talk), Workshop ``Control Methods in Hyperbolic Partial Differential Equations'' (Hybrid Event), November 5 - 10, 2023, Mathematisches Forschungsinstitut Oberwolfach, November 7, 2023.
-
P. Farrell, S. Kayser, N. Rotundo, Modeling and simulation of the lateral photovoltage scanning method, SIAM Conference on Computational Science and Engineering -- CSE21 (Online Event), Texas, USA, March 1 - 5, 2021.
-
N. Dropka , P. Farrell, S. Kayser, N. Rotundo, Numerics for innovative semiconductor devices -- An outlook, German Conference on Crystal Growth, Munich, March 11 - 13, 2020.
-
M. Hintermüller, Optimal control of multiphase fluids and droplets, Colloquium of the Mathematical Institute, University of Oxford, UK, June 7, 2019.
-
M. Hintermüller, Nonsmooth structures in PDE constrained optimization, Optimization Seminar, Chinese Academy of Sciences, State Key Laboratory of Scientific and Engineering Computing, Beijing, China, June 6, 2017.
-
M. Hintermüller, Optimal control of multiphase fluids and droplets, Salzburg Mathematics Colloquium, Universität Salzburg, Fachbereich Mathematik, Austria, June 9, 2016.
-
M. Hintermüller, Recent trends in optimal control problems with nonsmooth structures, Computational Methods for Control of Infinite-dimensional Systems, March 14 - 18, 2016, Institute for Mathematics and its Applications, Minneapolis, USA, March 14, 2016.
-
A. Glitzky, Drift-diffusion models for heterostructures in photovoltaics, 8th European Conference on Elliptic and Parabolic Problems, Minisymposium ``Qualitative Properties of Nonlinear Elliptic and Parabolic Equations'', May 26 - 30, 2014, Universität Zürich, Institut für Mathematik, organized in Gaeta, Italy, May 27, 2014.
-
M. Liero, On gradient structures for drift-reaction-diffusion systems and Markov chains, Analysis Seminar, University of Bath, Mathematical Sciences, UK, November 21, 2013.
-
M. Liero, On gradient structures and geodesic convexity for reaction-diffusion systems, Research Seminar, Westfälische Wilhelms-Universität Münster, Institut für Numerische und Angewandte Mathematik, April 17, 2013.
-
A. Glitzky, Continuous and finite volume discretized reaction-diffusion systems in heterostructures, Asymptotic Behaviour of Systems of PDE Arising in Physics and Biology: Theoretical and Numerical Points of View, November 6 - 8, 2013, Lille 1 University -- Science and Technology, France, November 6, 2013.
-
A. Mielke, Gradient structures and dissipation distances for reaction-diffusion systems, Workshop ``Material Theory'', December 16 - 20, 2013, Mathematisches Forschungsinstitut Oberwolfach, December 17, 2013.
-
A. Mielke, Using gradient structures for modeling semiconductors, Eindhoven University of Technology, Institute for Complex Molecular Systems, Netherlands, February 21, 2013.
-
TH. Koprucki, A. Glitzky, A. Fischer, Electronic and thermal effects in organic semiconductors, Organic Photovoltaics Workshop, Oxford University, Mathematical Institute, UK, April 2, 2012.
-
M. Liero, Interfaces in reaction-diffusion systems, Seminar ``Dünne Schichten'', Technische Universität Berlin, Institut für Mathematik, February 9, 2012.
-
M. Liero, Interfaces in solar cells, 5th Annual Meeting Photonic Devices, February 23, 2012, Konrad-Zuse-Zentrum für Informationstechnik, Berlin, February 24, 2012.
-
M. Liero, WIAS-TeSCA simulations in photovoltaics for a point contact concept of heterojunction thin film solar cells, International Workshop ``Mathematics for Semiconductur Heterostructures: Modeling, Analysis, and Numerics'', September 24 - 28, 2012, WIAS Berlin, September 25, 2012.
-
A. Glitzky, An electronic model for solar cells taking into account active interfaces, International Workshop ``Mathematics for Semiconductur Heterostructures: Modeling, Analysis, and Numerics'', September 24 - 28, 2012, WIAS Berlin, September 27, 2012.
-
A. Mielke, Multidimensional modeling and simulation of optoelectronic devices, Challenge Workshop ``Modeling, Simulation and Optimisation Tools'', September 24 - 26, 2012, Technische Universität Berlin, September 24, 2012.
-
A. Mielke, Using gradient structures for modeling semiconductors, International Workshop ``Mathematics for Semiconductur Heterostructures: Modeling, Analysis, and Numerics'', September 24 - 28, 2012, WIAS Berlin, September 24, 2012.
-
M. Liero, Derivation of effective interface conditions for reaction-diffusion equations, 82th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2011), Session on Applied Analysis, April 18 - 21, 2011, Technische Universität Graz, Austria, April 19, 2011.
-
A. Glitzky, An electronic model for solar cells including active interfaces, Workshop ``Mathematical Modelling of Organic Photovoltaic Devices'', University of Cambridge, Department of Applied Mathematics and Theoretical Physics, UK, June 9, 2011.
-
A. Glitzky, Analysis of electronic models for solar cells including energy resolved defect densities, 82th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2011), Session on Applied Analysis, April 18 - 21, 2011, Technische Universität Graz, Austria, April 20, 2011.
-
A. Mielke, Thermodynamical modeling of bulk-interface interaction in reaction-diffusion systems, Interfaces and Discontinuities in Solids, Liquids and Crystals (INDI2011), June 20 - 23, 2011, Gargnano (Brescia), Italy, June 20, 2011.
-
A. Mielke, Mathematical approaches to thermodynamic modeling, Autumn School on Mathematical Principles for and Advances in Continuum Mechanics, November 7 - 12, 2011, Centro di Ricerca Matematica ``Ennio De Giorgi'', Pisa, Italy.
-
A. Mielke, Gradient structures for electro-reaction-diffusion systems with applications in photovoltaics, First Interdisciplinary Workshop of the German-Russian Interdisciplinary Science Center (G-RISC) ``Structure and Dynamics of Matter'', October 18 - 20, 2010, Freie Universität Berlin and Helmholtz-Zentrum Berlin für Materialien und Energie, October 19, 2010.
-
A. Mielke, Gradient structures for reaction-diffusion systems and semiconductor equations, 81th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2010), Session on Applied Analysis, March 22 - 26, 2010, Universität Karlsruhe, March 24, 2010.
-
A. Mielke, Gradient structures for reaction-diffusion systems and semiconductor models with interface dynamics, International Conference on Evolution Equations, October 11 - 14, 2010, Technische Universität Darmstadt, Fachbereich Mathematik, Schmitten, October 12, 2010.
-
A. Mielke, The GENERIC formulation for dissipative temperature-dependent materials, International Symposium on Trends in Applications of Mathematics to Mechanics (STAMM 2010), August 30 - September 2, 2010, Technische Universität Berlin, Institut für Mechanik, Berlin, September 1, 2010.
Ansprechpartner
Mathematischer Kontext
- Algorithmen für die Erzeugung 3D randkonformer Delaunaygitter
- Analysis partieller Differentialgleichungen und Evolutionsgleichungen
- Direkte und inverse Probleme für die Maxwellgleichungen
- Freie Randwertprobleme für partielle Differentialgleichungen
- Funktionalanalysis und Operatortheorie
- Mehrskalenmodellierung, asymptotische Analysis und Hybridmodelle
- Modellierung, Analysis und Numerik von Phasenfeldmodellen
- Numerische Verfahren für Probleme der Strömungsmechanik
- Optimale Steuerung partieller Differentialgleichungen und nichtlineare Optimierung
- Systeme partieller Differentialgleichungen: Modellierung, numerische Analysis und Simulation